# Generat per a:
<br /># RouterOSv2.9
<br />:log info "Unsolclic for 4188-TarAbocadorST1 going to be executed."
<br /># 
<br /># Configuration for RouterOS > 2.9.50 or 3.4
<br /># Trasto: 4188-TarAbocadorST1
<br /># 
<br /># WARNING: Beta version
<br /># 
<br /># Methods to upload/execute this script:
<br /># 1.-As a script. Upload this output as a script either with:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;a.Winbox (with Linux, wine required)
<br /># &nbsp;&nbsp;&nbsp;&nbsp;b.Terminal (telnet, ssh...)
<br /># &nbsp;&nbsp;&nbsp;Then execute the script with:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;>&nbsp;/system script run script_name
<br /># 2.-Imported file:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Save this output to a file, then upload it to the router
<br /># &nbsp;&nbsp;&nbsp;&nbsp;using ftp using a name like "script_name.rsc".
<br /># &nbsp;&nbsp;&nbsp;&nbsp;(note that extension ".rsc" is required)
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Run the import file using the command:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;>&nbsp;/import script_name
<br /># 3.-Telnet cut&paste:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Open a terminal session, and cut&paste this output
<br /># &nbsp;&nbsp;&nbsp;&nbsp;directly on the terminal input.
<br /># 
<br /># Notes:
<br /># -routing-test package is required, be sure you have it enabled at system packages
<br /># -wlans should be enabled manually, be sure to set the correct antenna (a or b)
<br /># &nbsp;&nbsp;according in how did you connect the cable to the miniPCI. Keep the
<br /># &nbsp;&nbsp;power at the minimum possible and check the channel.
<br /># -The script doesn't reset the router, you might have to do it manually
<br /># -You must have write access to the router
<br /># -MAC access (winbox, MAC telnet...) method is recommended
<br /># &nbsp;&nbsp;(the script reconfigures some IP addresses, so communication can be lost)
<br /># -No changes are done in user passwords on the device
<br /># -A Read Only guest account with no password will be created to allow guest access
<br /># &nbsp;&nbsp;to the router with no danger of damage but able to see the config.
<br /># -Be sure that all packages are activated.
<br /># -Don't run the script from telnet and being connected through an IP connection at
<br /># &nbsp;&nbsp;the wLan/Lan interface: This interface will be destroyed during the script.
<br /># 
<br />/ system identity set name=TarAbocadorST1
<br /># 
<br /># DNS (client &#038; server cache) zone: 7818
<br />:delay 1
<br /># 
<br /># NTP (client &#038; server cache) zone: 7818
<br />/system ntp server set manycast=no enabled=yes
<br />:delay 1
<br /># 
<br /># Bandwidth-server
<br />/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
<br /># 
<br /># SNMP
<br />/snmp set contact="guifi@guifi.net" enabled=yes location="TarAbocador"
<br /># 
<br /># Guest user
<br />/user
<br />:foreach i in [find group=read] do={/user remove $i;}
<br />add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
<br /># 
<br /># Graphing
<br />/tool graphing interface add
<br /># Remove current wLan/Lan bridge if exists
<br />:foreach i in [/interface bridge find name=wLan/Lan] \ 
<br />do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \ 
<br />do={/interface bridge port remove $i; \ 
<br />:foreach i in [/ip address find interface=wLan/Lan] \ 
<br />do={/ip address remove $i;};};
<br />/interface bridge remove $i;}
<br /># Construct main bridge on wlan1 &#038; ether1
<br />/ interface bridge
<br />add name="wLan/Lan"
<br />/ interface bridge port
<br />add interface=ether1 bridge=wLan/Lan
<br />add interface=wlan1 bridge=wLan/Lan
<br />:delay 1
<br /># 
<br /># Radio#: 0 TarAbocadorConsell
<br />/interface wireless set wlan1 name="wlan1" \ 
<br />    radio-name="TarAbocadorConsell" mode=ap-bridge ssid="guifi.net-TarAbocadorConsell" \ 
<br />    band="5ghz" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=5500 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan1] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_TarConsellST1" master-interface=wlan1 wds-address=FF:FF:FF:FF:FF:FF disabled=yes
<br />/ ip address add address=172.25.4.246/30 network=172.25.4.244 broadcast=172.25.4.247 interface=wds_TarConsellST1 disabled=yes comment="wds_TarConsellST1"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_TarConsellST1] do={/routing ospf interface remove $i;}
<br />add interface=wds_TarConsellST1
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.4.244/30] do={/routing ospf network remove $i;}
<br />add network=172.25.4.244/30 area=backbone disabled=yes
<br />/ routing bgp peer
<br />:foreach i in [find name=TarConsellST1] do={/routing bgp peer remove $i;}
<br />add name="TarConsellST1" instance=default remote-address=172.25.4.245 remote-as=4189 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
<br /># 
<br />:delay 1
<br /># Type: wLan/Lan
<br />/ip address
<br />:foreach i in [find address="10.138.79.1/27"] do={remove $i}
<br />/ ip address add address=10.138.79.1/27 network=10.138.79.0 broadcast=10.138.79.31 interface=wLan/Lan disabled=no
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
<br />add interface=wLan/Lan
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=10.138.79.0/27] do={/routing ospf network remove $i;}
<br />add network=10.138.79.0/27 area=backbone disabled=no
<br />:delay 1
<br /># 
<br /># DHCP
<br />/ip dhcp-server lease
<br />:foreach i in [find comment=""] do={remove $i;}
<br />:delay 1
<br />:foreach i in [/ip dhcp-server network find address="10.138.79.0/27"] do={/ip dhcp-server network remove $i;}
<br />:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
<br />/ip pool add name=dhcp-wLan/Lan ranges=10.138.79.7-10.138.79.30
<br />/ip dhcp-server network add address=10.138.79.0/27 gateway=10.138.79.1 domain=guifi.net comment=dhcp-wLan/Lan
<br />:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
<br />/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 1 TarAbocadorAnglesola
<br />/interface wireless set wlan2 name="wlan2" \ 
<br />    radio-name="TarAbocadorAnglesola" mode=ap-bridge ssid="guifi.net-TarAbocadorAnglesola" \ 
<br />    band="5ghz" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=5540 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan2] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_AnglesolaST1" master-interface=wlan2 wds-address=FF:FF:FF:FF:FF:FF disabled=yes
<br />/ ip address add address=172.25.5.30/30 network=172.25.5.28 broadcast=172.25.5.31 interface=wds_AnglesolaST1 disabled=yes comment="wds_AnglesolaST1"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_AnglesolaST1] do={/routing ospf interface remove $i;}
<br />add interface=wds_AnglesolaST1
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.5.28/30] do={/routing ospf network remove $i;}
<br />add network=172.25.5.28/30 area=backbone disabled=yes
<br />/ routing bgp peer
<br />:foreach i in [find name=AnglesolaST1] do={/routing bgp peer remove $i;}
<br />add name="AnglesolaST1" instance=default remote-address=172.25.5.29 remote-as=4192 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 2 TarAbocadorPreixana
<br />/interface wireless set wlan3 name="wlan3" \ 
<br />    radio-name="TarAbocadorPreixana" mode=ap-bridge ssid="guifi.net-TarAbocadorPreixana" \ 
<br />    band="5ghz" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=5520 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan3] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_PreixanaST1" master-interface=wlan3 wds-address=FF:FF:FF:FF:FF:FF disabled=yes
<br />/ ip address add address=172.25.5.10/30 network=172.25.5.8 broadcast=172.25.5.11 interface=wds_PreixanaST1 disabled=yes comment="wds_PreixanaST1"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_PreixanaST1] do={/routing ospf interface remove $i;}
<br />add interface=wds_PreixanaST1
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.5.8/30] do={/routing ospf network remove $i;}
<br />add network=172.25.5.8/30 area=backbone disabled=yes
<br />/ routing bgp peer
<br />:foreach i in [find name=PreixanaST1] do={/routing bgp peer remove $i;}
<br />add name="PreixanaST1" instance=default remote-address=172.25.5.9 remote-as=4191 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
<br /># 
<br />:delay 1
<br /># 
<br /># Routed device
<br /># 
<br /># Other cable connections
<br /># 
<br /># Internal addresses NAT
<br />:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
<br />:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
<br />/ip firewall nat
<br />add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.138.79.1 to-ports=0-65535 comment="" disabled=no
<br />add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.138.79.1 to-ports=0-65535 comment="" disabled=no
<br /># 
<br /># BGP Routing
<br /># BGP &#038; OSPF Filters
<br />:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
<br />:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
<br />/ routing filter
<br />add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
<br />add chain=ospf-out invert-match=no action=discard comment="" disabled=no
<br />add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
<br />add chain=ospf-in invert-match=no action=reject comment="" disabled=no
<br /># 
<br /># BGP instance
<br />/ routing bgp instance
<br />set default name="default" as=4188 router-id=10.138.79.1 redistribute-static=yes \ 
<br />redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \ 
<br />redistribute-other-bgp=yes out-filter=ospf-out \ 
<br />client-to-client-reflection=yes comment="" disabled=no
<br /># 
<br /># OSPF Routing
<br />/routing ospf set router-id=10.138.79.1 redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-bgp=as-type-1
<br /># 
<br />:log info "Unsolclic for 4188-TarAbocadorST1 executed."
<br />/
<br />