# Generat per a:
<br /># RouterOSv2.9
<br />:log info "Unsolclic for 2829-GurbElSerratST2 going to be executed."
<br /># 
<br /># Configuration for RouterOS > 2.9.50 or 3.4
<br /># Trasto: 2829-GurbElSerratST2
<br /># 
<br /># WARNING: Beta version
<br /># 
<br /># Methods to upload/execute this script:
<br /># 1.-As a script. Upload this output as a script either with:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;a.Winbox (with Linux, wine required)
<br /># &nbsp;&nbsp;&nbsp;&nbsp;b.Terminal (telnet, ssh...)
<br /># &nbsp;&nbsp;&nbsp;Then execute the script with:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;>&nbsp;/system script run script_name
<br /># 2.-Imported file:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Save this output to a file, then upload it to the router
<br /># &nbsp;&nbsp;&nbsp;&nbsp;using ftp using a name like "script_name.rsc".
<br /># &nbsp;&nbsp;&nbsp;&nbsp;(note that extension ".rsc" is required)
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Run the import file using the command:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;>&nbsp;/import script_name
<br /># 3.-Telnet cut&paste:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Open a terminal session, and cut&paste this output
<br /># &nbsp;&nbsp;&nbsp;&nbsp;directly on the terminal input.
<br /># 
<br /># Notes:
<br /># -routing-test package is required, be sure you have it enabled at system packages
<br /># -wlans should be enabled manually, be sure to set the correct antenna (a or b)
<br /># &nbsp;&nbsp;according in how did you connect the cable to the miniPCI. Keep the
<br /># &nbsp;&nbsp;power at the minimum possible and check the channel.
<br /># -The script doesn't reset the router, you might have to do it manually
<br /># -You must have write access to the router
<br /># -MAC access (winbox, MAC telnet...) method is recommended
<br /># &nbsp;&nbsp;(the script reconfigures some IP addresses, so communication can be lost)
<br /># -No changes are done in user passwords on the device
<br /># -A Read Only guest account with no password will be created to allow guest access
<br /># &nbsp;&nbsp;to the router with no danger of damage but able to see the config.
<br /># -Be sure that all packages are activated.
<br /># -Don't run the script from telnet and being connected through an IP connection at
<br /># &nbsp;&nbsp;the wLan/Lan interface: This interface will be destroyed during the script.
<br /># 
<br />/ system identity set name=GurbElSerratST2
<br /># 
<br /># DNS (client &#038; server cache) zone: 2451
<br />/ip dns set primary-dns=10.138.25.68 secondary-dns=10.138.0.2 allow-remote-requests=yes
<br />:delay 1
<br /># 
<br /># NTP (client &#038; server cache) zone: 2451
<br />/system ntp client set enabled=yes mode=unicast primary-ntp=10.138.15.130
<br />/system ntp server set manycast=no enabled=yes
<br />:delay 1
<br /># 
<br /># Bandwidth-server
<br />/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
<br /># 
<br /># SNMP
<br />/snmp set contact="guifi@guifi.net" enabled=yes location="GurbElSerrat"
<br /># 
<br /># Guest user
<br />/user
<br />:foreach i in [find group=read] do={/user remove $i;}
<br />add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
<br /># 
<br /># Graphing
<br />/tool graphing interface add
<br /># Remove current wLan/Lan bridge if exists
<br />:foreach i in [/interface bridge find name=wLan/Lan] \ 
<br />do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \ 
<br />do={/interface bridge port remove $i; \ 
<br />:foreach i in [/ip address find interface=wLan/Lan] \ 
<br />do={/ip address remove $i;};};
<br />/interface bridge remove $i;}
<br /># Construct main bridge on wlan1 &#038; ether1
<br />/ interface bridge
<br />add name="wLan/Lan"
<br />/ interface bridge port
<br />add interface=ether1 bridge=wLan/Lan
<br />add interface=wlan1 bridge=wLan/Lan
<br />:delay 1
<br /># 
<br /># Radio#: 0 GurbElSerratPuntAS
<br />/interface wireless set wlan1 name="wlan1" \ 
<br />    radio-name="GurbElSerratPuntAS" mode=ap-bridge ssid="guifi.net-GurbElSerratPuntAS" \ 
<br />    band="5ghz" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=5180 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan1] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_SHVPuntASST" master-interface=wlan1 wds-address=00:0C:42:0C:1A:E6 disabled=no
<br />/ ip address add address=172.25.3.117/30 network=172.25.3.116 broadcast=172.25.3.119 interface=wds_SHVPuntASST disabled=no comment="wds_SHVPuntASST"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_SHVPuntASST] do={/routing ospf interface remove $i;}
<br />add interface=wds_SHVPuntASST
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.3.116/30] do={/routing ospf network remove $i;}
<br />add network=172.25.3.116/30 area=backbone disabled=yes
<br />/ routing bgp peer
<br />:foreach i in [find name=SHVPuntASST] do={/routing bgp peer remove $i;}
<br />add name="SHVPuntASST" instance=default remote-address=172.25.3.118 remote-as=2826 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
<br /># 
<br />:delay 1
<br /># Type: wLan/Lan
<br />/ip address
<br />:foreach i in [find address="10.138.0.1/27"] do={remove $i}
<br />/ ip address add address=10.138.0.1/27 network=10.138.0.0 broadcast=10.138.0.31 interface=wLan/Lan disabled=no
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
<br />add interface=wLan/Lan
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=10.138.0.0/27] do={/routing ospf network remove $i;}
<br />add network=10.138.0.0/27 area=backbone disabled=no
<br />:delay 1
<br /># 
<br /># DHCP
<br />/ip dhcp-server lease
<br />:foreach i in [find comment=""] do={remove $i;}
<br />:delay 1
<br />add address=10.138.0.2 mac-address=ff:ff:ff:ff:ff:ff client-id=elserrat server=dhcp-wLan/Lan
<br />add address=10.138.0.3 mac-address=ff:ff:ff:ff:ff:ff client-id=GurbElSerratADSL1 server=dhcp-wLan/Lan
<br />add address=10.138.0.4 mac-address=ff:ff:ff:ff:ff:ff client-id=ElSerratVeuIP server=dhcp-wLan/Lan
<br />add address=10.138.0.5 mac-address=ff:ff:ff:ff:ff:ff client-id=elserratSP-3000 server=dhcp-wLan/Lan
<br />:foreach i in [/ip dhcp-server network find address="10.138.0.0/27"] do={/ip dhcp-server network remove $i;}
<br />:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
<br />/ip pool add name=dhcp-wLan/Lan ranges=10.138.0.11-10.138.0.30
<br />/ip dhcp-server network add address=10.138.0.0/27 gateway=10.138.0.1 domain=guifi.net comment=dhcp-wLan/Lan
<br />:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
<br />/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 1 GurbElSerratSeri
<br />/interface wireless set wlan2 name="wlan2" \ 
<br />    radio-name="GurbElSerratSeri" mode=ap-bridge ssid="guifi.net-GurbElSerratSeri" \ 
<br />    band="5ghz" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=5240 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan2] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_GurbElSeriST" master-interface=wlan2 wds-address=00:0C:42:05:05:ED disabled=no
<br />/ ip address add address=172.25.2.170/30 network=172.25.2.168 broadcast=172.25.2.171 interface=wds_GurbElSeriST disabled=no comment="wds_GurbElSeriST"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_GurbElSeriST] do={/routing ospf interface remove $i;}
<br />add interface=wds_GurbElSeriST
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.2.168/30] do={/routing ospf network remove $i;}
<br />add network=172.25.2.168/30 area=backbone disabled=yes
<br />/ routing bgp peer
<br />:foreach i in [find name=GurbElSeriST] do={/routing bgp peer remove $i;}
<br />add name="GurbElSeriST" instance=default remote-address=172.25.2.169 remote-as=3401 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 2 GurbElSerratST2-Pavello
<br />/interface wireless set wlan3 name="wlan3" \ 
<br />    radio-name="GurbElSerratST2-Pavello" mode=ap-bridge ssid="guifi.net-GurbElSerratST2-Pavello" \ 
<br />    band="5ghz" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=5260 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan3] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_GurbPavelloST1" master-interface=wlan3 wds-address=00:0B:6B:4D:47:DD disabled=no
<br />/ ip address add address=172.25.4.93/30 network=172.25.4.92 broadcast=172.25.4.95 interface=wds_GurbPavelloST1 disabled=no comment="wds_GurbPavelloST1"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_GurbPavelloST1] do={/routing ospf interface remove $i;}
<br />add interface=wds_GurbPavelloST1
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.4.92/30] do={/routing ospf network remove $i;}
<br />add network=172.25.4.92/30 area=backbone disabled=yes
<br />/ routing bgp peer
<br />:foreach i in [find name=GurbPavelloST1] do={/routing bgp peer remove $i;}
<br />add name="GurbPavelloST1" instance=default remote-address=172.25.4.94 remote-as=1916 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 3 GurbElSerratST2-SEBAj
<br />/interface wireless set wlan4 name="wlan4" \ 
<br />    radio-name="GurbElSerratST2-SEBAj" mode=ap-bridge ssid="guifi.net-GurbElSerratST2-SEBAj" \ 
<br />    band="5ghz" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=5180 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan4] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_StaEugeniaAjST" master-interface=wlan4 wds-address=00:0C:42:05:4F:53 disabled=no
<br />/ ip address add address=172.25.4.133/30 network=172.25.4.132 broadcast=172.25.4.135 interface=wds_StaEugeniaAjST disabled=no comment="wds_StaEugeniaAjST"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_StaEugeniaAjST] do={/routing ospf interface remove $i;}
<br />add interface=wds_StaEugeniaAjST
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.4.132/30] do={/routing ospf network remove $i;}
<br />add network=172.25.4.132/30 area=backbone disabled=yes
<br />/ routing bgp peer
<br />:foreach i in [find name=StaEugeniaAjST] do={/routing bgp peer remove $i;}
<br />add name="StaEugeniaAjST" instance=default remote-address=172.25.4.134 remote-as=1947 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
<br /># 
<br />:delay 1
<br /># 
<br /># Routed device
<br /># 
<br /># Other cable connections
<br /># 
<br /># Internal addresses NAT
<br />:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
<br />:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
<br />/ip firewall nat
<br />add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.138.0.1 to-ports=0-65535 comment="" disabled=no
<br />add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.138.0.1 to-ports=0-65535 comment="" disabled=no
<br /># 
<br /># BGP Routing
<br /># BGP &#038; OSPF Filters
<br />:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
<br />:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
<br />/ routing filter
<br />add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
<br />add chain=ospf-out invert-match=no action=discard comment="" disabled=no
<br />add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
<br />add chain=ospf-in invert-match=no action=reject comment="" disabled=no
<br /># 
<br /># BGP instance
<br />/ routing bgp instance
<br />set default name="default" as=2829 router-id=10.138.0.1 redistribute-static=yes \ 
<br />redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \ 
<br />redistribute-other-bgp=yes out-filter=ospf-out \ 
<br />client-to-client-reflection=yes comment="" disabled=no
<br /># 
<br /># OSPF Routing
<br />/routing ospf set router-id=10.138.0.1 redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-bgp=as-type-1
<br /># 
<br />:log info "Unsolclic for 2829-GurbElSerratST2 executed."
<br />/
<br />