# Generat per a:
<br /># RouterOSv3.x
<br />:log info "Unsolclic for 58-VicJaumeI-RB333 going to be executed."
<br /># 
<br /># Configuration for RouterOS > 2.9.50 or 3.4
<br /># Trasto: 58-VicJaumeI-RB333
<br /># 
<br /># WARNING: Beta version
<br /># 
<br /># Methods to upload/execute this script:
<br /># 1.-As a script. Upload this output as a script either with:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;a.Winbox (with Linux, wine required)
<br /># &nbsp;&nbsp;&nbsp;&nbsp;b.Terminal (telnet, ssh...)
<br /># &nbsp;&nbsp;&nbsp;Then execute the script with:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;>&nbsp;/system script run script_name
<br /># 2.-Imported file:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Save this output to a file, then upload it to the router
<br /># &nbsp;&nbsp;&nbsp;&nbsp;using ftp using a name like "script_name.rsc".
<br /># &nbsp;&nbsp;&nbsp;&nbsp;(note that extension ".rsc" is required)
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Run the import file using the command:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;>&nbsp;/import script_name
<br /># 3.-Telnet cut&paste:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Open a terminal session, and cut&paste this output
<br /># &nbsp;&nbsp;&nbsp;&nbsp;directly on the terminal input.
<br /># 
<br /># Notes:
<br /># -routing-test package is required, be sure you have it enabled at system packages
<br /># -wlans should be enabled manually, be sure to set the correct antenna (a or b)
<br /># &nbsp;&nbsp;according in how did you connect the cable to the miniPCI. Keep the
<br /># &nbsp;&nbsp;power at the minimum possible and check the channel.
<br /># -The script doesn't reset the router, you might have to do it manually
<br /># -You must have write access to the router
<br /># -MAC access (winbox, MAC telnet...) method is recommended
<br /># &nbsp;&nbsp;(the script reconfigures some IP addresses, so communication can be lost)
<br /># -No changes are done in user passwords on the device
<br /># -A Read Only guest account with no password will be created to allow guest access
<br /># &nbsp;&nbsp;to the router with no danger of damage but able to see the config.
<br /># -Be sure that all packages are activated.
<br /># -Don't run the script from telnet and being connected through an IP connection at
<br /># &nbsp;&nbsp;the wLan/Lan interface: This interface will be destroyed during the script.
<br /># 
<br />/ system identity set name=VicJaumeI-RB333
<br /># 
<br /># DNS (client &#038; server cache) zone: 2472
<br />/ip dns set primary-dns=10.138.160.98 secondary-dns=10.138.25.68 allow-remote-requests=yes
<br />:delay 1
<br /># 
<br /># NTP (client &#038; server cache) zone: 2472
<br />/system ntp client set enabled=yes mode=unicast primary-ntp=10.138.25.69
<br />:delay 1
<br /># 
<br /># Bandwidth-server
<br />/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
<br /># 
<br /># SNMP
<br />/snmp set contact="guifi@guifi.net" enabled=yes location="VicJaumeI"
<br /># 
<br /># Guest user
<br />/user
<br />:foreach i in [find group=read] do={/user remove $i;}
<br />add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
<br /># 
<br /># Graphing
<br />/tool graphing interface add
<br /># Remove current wLan/Lan bridge if exists
<br />:foreach i in [/interface bridge find name=wLan/Lan] \ 
<br />do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \ 
<br />do={/interface bridge port remove $i; \ 
<br />:foreach i in [/ip address find interface=wLan/Lan] \ 
<br />do={/ip address remove $i;};};
<br />/interface bridge remove $i;}
<br /># Construct main bridge on wlan1 &#038; ether1
<br />/ interface bridge
<br />add name="wLan/Lan"
<br />/ interface bridge port
<br />add interface=ether1 bridge=wLan/Lan
<br />add interface=wlan1 bridge=wLan/Lan
<br />:delay 1
<br /># 
<br /># Radio#: 0 VicJaumeI-AP-SO
<br />/interface wireless set wlan1 name="wlan1" \ 
<br />    radio-name="VicJaumeI-AP-SO" mode=ap-bridge ssid="guifi.net-VicJaumeI-AP-SO" \ 
<br />    band="2.4ghz-b" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=2427 \ 
<br />    dfs-mode=none \ 
<br />    antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wLan/Lan
<br />/ip address
<br />:foreach i in [find address="10.138.21.65/27"] do={remove $i}
<br />/ ip address add address=10.138.21.65/27 network=10.138.21.64 broadcast=10.138.21.95 interface=wLan/Lan disabled=no
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
<br />add interface=wLan/Lan
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=10.138.21.64/27] do={/routing ospf network remove $i;}
<br />add network=10.138.21.64/27 area=backbone disabled=no
<br />:delay 1
<br /># 
<br /># DHCP
<br />/ip dhcp-server lease
<br />:foreach i in [find comment=""] do={remove $i;}
<br />:delay 1
<br />add address=10.138.21.66 mac-address=00:16:B6:39:8E:F1 client-id=VicCarrerManlleuRadio1 server=dhcp-wLan/Lan
<br />add address=10.138.21.68 mac-address=00:0F:66:51:DD:64 client-id=VicBoMa server=dhcp-wLan/Lan
<br />add address=10.138.21.70 mac-address=00:13:10:3F:A8:5D client-id=VicJaumeI-DB server=dhcp-wLan/Lan
<br />add address=10.138.21.72 mac-address=00:12:17:15:D8:CE client-id=VicPlaBalenya server=dhcp-wLan/Lan
<br />add address=10.138.21.73 mac-address=00:19:7D:6A:41:4E client-id=VicPassatgeRadio1 server=dhcp-wLan/Lan
<br />add address=10.138.21.74 mac-address=00:1A:70:47:B8:55 client-id=VicZamenhoffRadio1 server=dhcp-wLan/Lan
<br />add address=10.138.21.77 mac-address=00:1C:10:36:4F:A1 client-id=VicMareDeuGlevaRadio1 server=dhcp-wLan/Lan
<br />add address=10.138.21.78 mac-address=00:1C:10:9A:72:37 client-id=VicPdpManlleuRadio1 server=dhcp-wLan/Lan
<br />:foreach i in [/ip dhcp-server network find address="10.138.21.64/27"] do={/ip dhcp-server network remove $i;}
<br />:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
<br />/ip pool add name=dhcp-wLan/Lan ranges=10.138.21.84-10.138.21.94
<br />/ip dhcp-server network add address=10.138.21.64/27 gateway=10.138.21.65 domain=guifi.net comment=dhcp-wLan/Lan
<br />:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
<br />/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
<br /># 
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan1] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 1 VicJaumeI-VicNord
<br />/interface wireless set wlan2 name="wlan2" \ 
<br />    radio-name="VicJaumeI-VicNord" mode=ap-bridge ssid="guifi.net-VicJaumeI-VicNord" \ 
<br />    band="5ghz" \ 
<br />    frequency-mode=manual-txpower country=spain antenna-gain=0 \ 
<br />    frequency=5700 \ 
<br />    dfs-mode=none \ 
<br />    antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan2] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_VicNordST" master-interface=wlan2 wds-address=00:0B:6B:36:6B:F6 disabled=no
<br />/ ip address add address=172.25.10.173/30 network=172.25.10.172 broadcast=172.25.10.175 interface=wds_VicNordST disabled=no comment="wds_VicNordST"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_VicNordST] do={/routing ospf interface remove $i;}
<br />add interface=wds_VicNordST
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.10.172/30] do={/routing ospf network remove $i;}
<br />add network=172.25.10.172/30 area=backbone disabled=no
<br />/ routing bgp peer
<br />:foreach i in [find name=VicNordST] do={/routing bgp peer remove $i;}
<br />add name="VicNordST" instance=default remote-address=172.25.10.174 remote-as=1999 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=yes
<br /># 
<br />:delay 1
<br /># 
<br /># Routed device
<br /># 
<br /># Other cable connections
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=ether2] do={/routing ospf interface remove $i;}
<br />add interface=ether2
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.2.160/29] do={/routing ospf network remove $i;}
<br />add network=172.25.2.160/29 area=backbone disabled=yes
<br />/ routing bgp peer
<br />:foreach i in [find name=VicJaumeI-ADSL] do={/routing bgp peer remove $i;}
<br />add name="VicJaumeI-ADSL" instance=default remote-address=172.25.2.161 remote-as=2531 \ 
<br />multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
<br />:foreach i in [/ip address find address="172.25.2.162/29"] do={/ip address remove $i;}
<br />:delay 1
<br />/ ip address add address=172.25.2.162/29 network=172.25.2.160 broadcast=172.25.2.167 interface=ether2 disabled=no comment="VicJaumeI-ADSL"
<br /># 
<br /># Internal addresses NAT
<br />:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
<br />:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
<br />/ip firewall nat
<br />add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.138.21.65 to-ports=0-65535 comment="" disabled=no
<br />add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.138.21.65 to-ports=0-65535 comment="" disabled=no
<br /># 
<br /># BGP Routing
<br /># BGP &#038; OSPF Filters
<br />:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
<br />:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
<br />/ routing filter
<br />add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
<br />add chain=ospf-out invert-match=no action=discard comment="" disabled=no
<br />add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
<br />add chain=ospf-in invert-match=no action=reject comment="" disabled=no
<br /># 
<br /># BGP instance
<br />/ routing bgp instance
<br />set default name="default" as=58 router-id=10.138.21.65 redistribute-static=yes \ 
<br />redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \ 
<br />redistribute-other-bgp=yes out-filter=ospf-out \ 
<br />client-to-client-reflection=yes comment="" disabled=no
<br /># 
<br /># OSPF Routing
<br />/routing ospf set router-id=10.138.21.65 redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-bgp=as-type-1
<br /># 
<br />:log info "Unsolclic for 58-VicJaumeI-RB333 executed."
<br />/
<br />