# Generat per a:
# RouterOSv2.9
:log info "Unsolclic for 5621-TorelloEmiST1 going to be executed."
#
# Configuration for RouterOS > 2.9.51 or 3.x
# Trasto: 5621-TorelloEmiST1
#
# ATENCIÓ: Versió Beta
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
#     a.Winbox (with Linux, wine required)
#     b.Terminal (telnet, ssh...)
#    Then execute the script with:
#      > /system script run script_name
# 2.-Fitxer importat:
#     Desa aquesta "sortida" a un fitxer, després puja'l al router
#     fent servir FTP amb un nom de l'estil "script_name.rsc".
#     (note, l'extensió ".rsc" es un requisit)
#     Executa el fitxer importat amb la comanda:
#      > /import script_name
# 3.-Telnet copia i enganxar:
#     Open a terminal session, and cut&paste this output
#     directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
#   according in how did you connect the cable to the miniPCI. Keep the
#   power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
#   (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
#   to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
#   the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=TorelloEmiST1
#
# DNS (client & server cache) zone: 2471
/ip dns set primary-dns=10.138.50.194 secondary-dns=10.138.25.68 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 2471
/system ntp client set enabled=yes mode=unicast primary-ntp=10.138.15.130
/system ntp server set manycast=no enabled=yes
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="Torello-EmiST1"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 TorelloEmiAPSud
/interface wireless set wlan1 name="wlan1" \
radio-name="TorelloEmiAPSud" mode=ap-bridge ssid="guifi.net-TorelloEmiAPSud" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
frequency=2432 \
dfs-mode=none \
wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.138.136.97/27"] do={remove $i}
/ ip address add address=10.138.136.97/27 network=10.138.136.96 broadcast=10.138.136.127 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.138.136.96/27] do={/routing ospf network remove $i;}
add network=10.138.136.96/27 area=backbone disabled=no
:delay 1
#
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.138.136.98 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloSantiR server=dhcp-wLan/Lan
add address=10.138.136.99 mac-address=00:14:BF:16:04:8B client-id=TorelloRPortabella server=dhcp-wLan/Lan
add address=10.138.136.100 mac-address=00:16:B6:11:45:D9 client-id=TorellorutRadio1 server=dhcp-wLan/Lan
add address=10.138.136.101 mac-address=00:14:BF:EB:76:1F client-id=TorelloJCarrera server=dhcp-wLan/Lan
add address=10.138.136.102 mac-address=00:16:01:16:93:9A client-id=TorelloNcarcassonaRadio1 server=dhcp-wLan/Lan
add address=10.138.136.103 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloJosepPouRadio1 server=dhcp-wLan/Lan
add address=10.138.136.104 mac-address=00:1D:7E:E3:A4:2B client-id=TorellomanuelmarotoRadio1 server=dhcp-wLan/Lan
add address=10.138.136.105 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloJArenas server=dhcp-wLan/Lan
add address=10.138.136.106 mac-address=00:14:BF:77:9C:B7 client-id=TorelloDataxipRadio3 server=dhcp-wLan/Lan
add address=10.138.136.107 mac-address=00:18:39:86:FA:60 client-id=TorelloRubioRadio2 server=dhcp-wLan/Lan
add address=10.138.136.108 mac-address=ff:ff:ff:ff:ff:ff client-id=TorellomanelmataRadio1 server=dhcp-wLan/Lan
add address=10.138.136.109 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloEmiAdsl server=dhcp-wLan/Lan
add address=10.138.136.110 mac-address=00:1C:10:44:2D:ED client-id=TorelloENinoRadio1 server=dhcp-wLan/Lan
add address=10.138.136.111 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloMartinRadio1 server=dhcp-wLan/Lan
add address=10.138.136.112 mac-address=00:00:00:00:00:00 client-id=TorelloZonaCRadio1 server=dhcp-wLan/Lan
add address=10.138.136.113 mac-address=00:18:F8:F2:66:B6 client-id=TorelloJCapaRadio1 server=dhcp-wLan/Lan
add address=10.138.136.114 mac-address=00:16:01:AF:1E:CF client-id=TorelloColomerRadio1 server=dhcp-wLan/Lan
add address=10.138.136.115 mac-address=00:16:01:AE:FF:3D client-id=TorelloAntonellRadio1 server=dhcp-wLan/Lan
add address=10.138.136.116 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloDeseurasRadio1 server=dhcp-wLan/Lan
add address=10.138.136.117 mac-address=00:1A:70:4F:3E:E1 client-id=TorelloToniRadio1 server=dhcp-wLan/Lan
add address=10.138.136.118 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloJPlanasRadio2 server=dhcp-wLan/Lan
add address=10.138.136.119 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloJosepMVRadio2 server=dhcp-wLan/Lan
add address=10.138.136.120 mac-address=00:16:01:F2:2C:25 client-id=TorelloNeusRadio1 server=dhcp-wLan/Lan
add address=10.138.136.121 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloBartrina server=dhcp-wLan/Lan
add address=10.138.136.122 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloXavierRadio1 server=dhcp-wLan/Lan
add address=10.138.136.123 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloJMallarachRadio1 server=dhcp-wLan/Lan
add address=10.138.136.124 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloZonaARadio1 server=dhcp-wLan/Lan
add address=10.138.136.125 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloZonaBRadio1 server=dhcp-wLan/Lan
add address=10.138.136.126 mac-address=ff:ff:ff:ff:ff:ff client-id=TorelloDaniV server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.138.136.96/27"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.138.136.126-10.138.136.126
/ip dhcp-server network add address=10.138.136.96/27 gateway=10.138.136.97 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=yes
#
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
#
# Radio#: 1 TorelloEmiST1DipSud
/interface wireless set wlan2 name="wlan2" \
radio-name="TorelloEmiST1DipSud" mode=ap-bridge ssid="guifi.net-TorelloEmiST1DipSud" \
band="5ghz" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
frequency=5680 \
dfs-mode=none \
wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan2] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
/ interface wireless wds
add name="wds_TorelloDipSudST1" master-interface=wlan2 wds-address=00:0B:6B:57:EE:66 disabled=no
/ ip address add address=172.25.16.53/30 network=172.25.16.52 broadcast=172.25.16.55 interface=wds_TorelloDipSudST1 disabled=no comment="wds_TorelloDipSudST1"
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wds_TorelloDipSudST1] do={/routing ospf interface remove $i;}
add interface=wds_TorelloDipSudST1
/ routing ospf network
:foreach i in [/routing ospf network find network=172.25.16.52/30] do={/routing ospf network remove $i;}
add network=172.25.16.52/30 area=backbone disabled=no
/ routing bgp peer
:foreach i in [find name=TorelloDipSudST1] do={/routing bgp peer remove $i;}
add name="TorelloDipSudST1" instance=default remote-address=172.25.16.54 remote-as=2582 \
multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=yes
#
:delay 1
#
# Routed device
#
# Altres connexions de cable
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.138.136.97 to-ports=0-65535 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.138.136.97 to-ports=0-65535 comment="" disabled=no
#
# Enrutament BGP
# Filtres BGP i OSPF
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# Instància BGP
/ routing bgp instance
set default name="default" as=5621 router-id=10.138.136.97 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# Enrutament OSPF
/routing ospf set router-id=10.138.136.97 redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-bgp=as-type-1
#
:log info "Unsolclic for 5621-TorelloEmiST1 executed."
/